What are the wiring methods for led strip lights?

strip lights are a common decorative lamp, which can be used for decoration in homes, businesses, entertainment and other places. There are many ways to connect strip lights, and each one should be paid special attention to so as not to affect future use. So how many ways are there to connect strip lights?

A. What are the wiring methods for strip lights?

Wiring methods for strip lights - series wiring method

The series wiring method is to connect multiple strip lights together in sequence to form a long strip light. This wiring method is suitable for places that require long-distance lighting, such as shopping malls, squares, etc. The specific steps are as follows:

1. Connect the positive and negative poles of multiple strip lights together to form a long strip light.

2. Connect the positive and negative poles of the long strip light to the power supply respectively, and pay attention to the connection order of the positive and negative poles.

3. Turn on the power supply and test whether the strip light is working properly.

Wiring method of strip lights - parallel wiring method

The parallel wiring method is to connect multiple strip lights in parallel, and each strip light can work independently. This wiring method is suitable for places that require zoned lighting, such as hotels, restaurants, etc. The specific operation steps are as follows:

1. Connect the positive poles of multiple strip lights together, and connect the negative poles of multiple strip lights together.

2. Connect the positive and negative poles after parallel connection to the power supply respectively, and pay attention to the connection order of the positive and negative poles.

3. Turn on the power supply and test whether the strip light works normally.

Wiring method of strip light - segment wiring method

The segment wiring method is to divide the long strip light into several sections, and each section of the strip light can work independently. This wiring method is suitable for places that need segment control, such as stages, performances, etc. The specific operation steps are as follows:

1. Divide the long strip light into several sections, and adjust the length of each section of the strip light as needed.

2. Connect the positive and negative poles of each section of the strip light to the controller respectively, and pay attention to the connection order of the positive and negative poles.

3. Connect the controller to the power supply, turn on the power supply, and test whether each section of the strip light is working properly.

B. What should be paid attention to when wiring the strip light

1. The interface of the power cord and the strip light must match, and cannot be forced to connect.

2. The wiring of the strip light must be firm, not loose or in poor contact.

3. The power must be turned off during wiring to avoid electric shock or short circuit.

4. The wiring of the strip light must be connected according to the correct polarity, otherwise it will affect the brightness and life of the strip light.

5. The wiring of the strip light must meet safety standards, and inferior materials or unqualified wiring methods cannot be used.

6. During the wiring process, pay attention to protect the circuit board of the strip light to avoid damage.

7. When using the strip light, be careful to avoid excessive pulling or bending to avoid affecting the service life of the strip light

Summary: There are several ways to connect the strip light. I will introduce them here first. Do you understand them? The above are three common ways to connect the strip light. Different wiring methods are suitable for different places and needs. When connecting, you must pay attention to the connection sequence of the positive and negative poles to avoid safety problems such as short circuits. At the same time, you must also choose a suitable power supply and controller to ensure the normal operation of the strip light.